Posts: 3
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2010
need to no if the timing chain breaks is it going to bent the valves
Posts: 385
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2010
yes it will. even being off 1 tooth will bend valves. i found out the hard way
Posts: 130
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2009
Not all the time depends on the circumstance but most of the time yes
Posts: 101
Threads: 11
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2010
i ran mine with 1 tooth off for over a year... just ran funny, hada bad stutter about 3-4 grand. now its back in time and runs smooth n strong off idle.. i turned motor by hand before starting and no problem. they will run with a cam one tooth off.
