hand brake set up ?'s

[J Free]

bike is F4i

If I am running a Single caliper adapter set up and have the regular single piston rear caliper (not the 4 piston rear caliper setup with bracket), will the stock 04-05 CBR1000RR front brake radial master cylinder flipped work well or is that set up only favored for a dual caliper set up. I can get my hands on one fairly cheap but I cant find anywhere what the piston diameter is on the 04/05 CBR1000RR front brake master cylinder.

Thanks

[Moto-Madness.com]

It will work fine but ideally the Magura 13mm or Brembo 16x18 is butter

[J Free]

thanks for the input

[N/A]

I ran the 1000RR master, but I had a dual caliper setup... it worked really well, but make sure you bleed it!!! Don't just power bleed it, I mean do all the little tricks to get every last bubble out!

[lordhunglo]

just got a DQ setup from FTI...
not looking forward to da bleeding...

[Moto-Madness.com]

Should get one of these for $45. Makes bleeding easy and i use them all the time

http://moto-madness.com/catalog/inde...oducts_id=1030

[SKETCHY]

I always fill the reservoir and let gravity do its thing. I always unhook the brakeline at the rear caliper until it starts dripping out, then i bolt the brakeline to the caliper. I loosen the bleeder until it starts coming out of there. Then i bleed the system from the caliper working my way up to the master