Posts: 9
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
Originally Posted by
SickIan
Was the bag busted open? Shouldn't have been missing a spacer. Don't run it without all of the spacers in place. Yes we will send you another spacer. I wouldn't recommend trying to spread the cage. Sometimes they get a little bit of spring in from welding the gussets, but we have never had one that wouldn't go on. Email me at
sickinnovations@insightbb.com. I have some install pictures that should make it alot easier.
Got the new spacer in today, and got it reassembled. After some negotiations it fits a lot more flush with the frame that the first go around. Thanks for getting the spacer out here so fast!
Posts: 98
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2010
Hi!
I just bought an old style f4i cage and I think I just got spacers for the rear mount. Would I need spacers and/or other bolts for the front motor mount? Or is it just to mount the cage with the althread and spacers in the rear and just stock bolts in the front?
Posts: 179
Threads: 15
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2008
Originally Posted by
Larse
Hi!
I just bought an old style f4i cage and I think I just got spacers for the rear mount. Would I need spacers and/or other bolts for the front motor mount? Or is it just to mount the cage with the althread and spacers in the rear and just stock bolts in the front?
You need qty 2 of 10mmx1.25x70mm bolts for the front, 15 1/4in rod for the rear, 3/8x16x1 3/4 bolt for the mount down by the header, then the 2 3/4 spacers go to the left front and left rear mounts for the left side of the cage.
Posts: 98
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2010
Originally Posted by
SickIan
You need qty 2 of 10mmx1.25x70mm bolts for the front, 15 1/4in rod for the rear, 3/8x16x1 3/4 bolt for the mount down by the header, then the 2 3/4 spacers go to the left front and left rear mounts for the left side of the cage.
Ok great then i'm just missing the front bolts.
Huge thanks man!
Posts: 179
Threads: 15
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2008
Originally Posted by
Larse
Ok great then i'm just missing the front bolts.
Huge thanks man!
Not a problem at all. The 10mmx1.25 are very hard to find in the states. Im not sure about Sweden. If you have problems, let me know. We stock them. Thanks man.
Posts: 1,194
Threads: 67
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2009
Just ordered some rearsets for the 11 zx6r can't wait to get them
Sent from my SCH-I535 using Tapatalk
now Free
Posts: 65
Threads: 3
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2008
my rig with si round bar,cage,and rear sets
Posts: 127
Threads: 33
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2006
Looking to get ahold of Ian...Does he have a Sick-innovations company # or is email the best way. Looking to get a 929 roundbar and subcage plus the Race rail pucks and hardware
Posts: 89
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2011
If you go to the website there is a phone number listed. Every time I have ever called, they have picked up and helped out.
Posts: 924
Threads: 28
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2006
Originally Posted by
CONGO
If you go to the website there is a phone number listed. Every time I have ever called, they have picked up and helped out.
+1.. I ordered my round bar for my 929 and he even had to send it to PC to get mine done in Red... Nothing but
Greatness from Sick
Try messaging him here if you want.. (Tellem WHEELIE sent ya)
https://www.facebook.com/sickinnovations
