Posts: 23
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2012
so im pretty sure i fucked up
... i cut my red and green wires and put them together for the tilt sensor... then for some reason i cut the white one... would this cause my lights not to come back on when i hook them back up...
Posts: 79
Threads: 13
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2011
you're not supposed to clip the white one...
Posts: 23
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2012
Posts: 23
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2012
Anyway to fix my dumbass fuck up lol ..
Posts: 79
Threads: 13
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2011
Posts: 903
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2006
Quote:
Originally Posted by kapzanass1
so im pretty sure i fucked up ... i cut my red and green wires and put them together for the tilt sensor... then for some reason i cut the white one... would this cause my lights not to come back on when i hook them back up...
|
Multiple people have told you that the tip over has nothing to do with the lights.
Quote:
Originally Posted by Tattooty
you're not supposed to clip the white one...
|
Yes you are, you connect the two outer wires and leave the white one disconnected.
Posts: 903
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2006
If your headlights worked before you bypassed the tip over switch then you probably forgot to plug something back in when you put the upper back on.
Are your hand controls plugged in?
Posts: 23
Threads: 8
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2012
