Posts: 385
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2010
So I've been trying to find a wheel cheaper than ebay prices for my 09 zx6r. Turns out zx14 wheels are a direct swap and only 100 bucks on ebay. Yes the wheel is 2lbs heavier but I'm not worried about that on a stunt bike.
Just figured id post up to inform others. Help keep some money in our pockets
Posts: 12
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2010
If i'm not wrong just like the zx10 the zx14 wheel is an half inch wider than the zx6?
They are running 190 tyres stock so that's mean that they are 6" wide and not 5.5" as the zx6 that uses 180 tyres?
Please correct me if i'm wrong
Posts: 58
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2009
Posts: 58
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2009
Posts: 267
Threads: 10
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2009

Originally Posted by
Tapper
If i'm not wrong just like the zx10 the zx14 wheel is an half inch wider than the zx6?
They are running 190 tyres stock so that's mean that they are 6" wide and not 5.5" as the zx6 that uses 180 tyres?
Please correct me if i'm wrong

Exactly but you can put a 180 on them.
Posts: 385
Threads: 23
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2010
Yes you are correct. The rear is bigger. I was referring to the front. Its a direct swap over.
Posts: 101
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2011
Yeah i have one on the front of my bike. wish I could fit one in my 0506 swinger but ya can't. I've seen the 14 rear wheel will fit in a 0304 swinger tho. Some badass wheels if ya can run both.
Posts: 12
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2010
2lbs on the front seems alot? Thats why i thought it was the rear
Posts: 6
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Nov 2015
Very good and informative exchange .. Thank you!
Posts: 8
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2015
What is the point in doing this ?